Labor Cost to Install a Vanity: Vanity Installation Cost

The labor cost to install a bathroom vanity in the Orlando area typically runs $300 to $900 in 2026 for a like-for-like swap, where the new vanity goes where the old one was and connects to the existing plumbing. When the job needs new supply or drain rough-in or wall changes, labor runs about $1,000 to $2,500 or more. The vanity itself is a separate line, roughly $300 to $3,000 or more for the cabinet. Below is what moves labor up or down, what a quote should include, and how tops and add-ons change the total.

Vanity installation cost at a glance

Typical Orlando-area planning ranges for 2026. They vary with the vanity, the condition of the plumbing and the wall, and permit scope, so a written estimate after seeing the bathroom is the only real number.

Item	Typical range
Labor, like-for-like vanity swap	$300 to $900
Labor, with new supply or drain rough-in or wall changes	$1,000 to $2,500+
Vanity cabinet (stock to semi-custom)	About $300 to $3,000+; custom more
Stone top installed on an existing vanity, labor	$250 to $700
Stone top material	Varies widely by size and material

Simple arithmetic from those ranges: an entry-level vanity with a pre-attached top on a like-for-like swap starts around $600 for cabinet and labor together. A new double vanity with relocated plumbing and a custom stone top costs several times that.

What drives the labor cost to install a vanity

Like-for-like or a new layout

The biggest factor is whether the new vanity matches the old one’s plumbing. If the drain and supply lines sit where the new cabinet needs them, the job is mostly removal, setting, leveling and reconnecting. If the new vanity is wider, a different style, or in a different spot, the plumber has to move or add lines inside the wall.

In most Central Florida homes the vanity drain runs into the wall rather than the floor, so moving it a few inches is wall work. Moving a vanity to another wall can mean slab work on a ground-floor bathroom, since most homes here are slab-on-grade.

Single vs double vanity

Replacing a double with a double of the same width is close to a standard swap. Turning a single into a double needs a second drain and supply rough-in, usually a new top, and often a second light and mirror. That puts labor in the higher range.

Vanity style

• Freestanding base cabinets are the most common and the most straightforward.
• Wall-mounted (floating) vanities need solid blocking inside the wall to carry the weight of the cabinet, top and anyone leaning on it. If the wall is open, blocking is easy; if not, it means opening and patching drywall.
• Furniture-style vanities with legs can expose plumbing and the floor beneath, so the flooring and the drain trim have to look finished.
• Custom or built-in vanities are assembled and scribed on site, which takes longer.

The top and sink

A vanity with a pre-attached top is fastest. A separate stone top has to be templated after the cabinet is set, fabricated, and then installed, which usually means a second visit. Labor to install a stone top on an existing vanity runs $250 to $700. Undermount sinks and vessel sinks each have their own mounting and faucet height details. Our guide to quartz vanity tops covers material choices.

Plumbing condition

Old or seized shutoff valves, corroded drain parts and galvanized supply lines are common in older Orlando-area homes. Replacing the valves while the vanity is out is cheap insurance, and worth doing even if it adds a little to the labor.

Walls and floors

When the old vanity comes out, the wall and floor behind it are often unfinished, unpainted or water damaged. A new vanity with a smaller footprint can expose a gap in the floor tile. Patching drywall, painting and matching flooring are extra work that should be in the quote.

Electrical

Adding a GFCI outlet beside the vanity, moving a light or adding a second fixture over a double vanity is electrical work done by a licensed electrician, and in most jurisdictions it needs a permit.

What a vanity installation quote should include

Ask for the scope in writing. A complete quote spells out:

• Removal and disposal of the old vanity, top and sink.
• Setting, leveling and securing the new cabinet.
• Top and sink installation, or a note that the top is installed separately.
• Faucet installation and drain assembly.
• New supply lines, and whether shutoff valves are being replaced.
• Any rough-in changes: drain height or location, supply lines, blocking for a wall-mounted unit.
• Drywall patching, paint, and flooring repair, or a note that they are excluded.
• Electrical work and permits, if any.
• Caulking, leak testing and cleanup.

Two quotes can look far apart simply because one includes valves, patching and haul-away and the other does not.

Vanity installation in a full remodel vs on its own

A vanity swap on its own is one of the more affordable bathroom upgrades. Inside a remodel, the vanity is just one line, and the plumbing and wall work is shared with the rest of the job. For example:

• A powder room remodel typically runs $5,000 to $12,000.
• A same-layout guest or hall bath typically runs $12,000 to $25,000.
• A full primary bathroom remodel typically runs $25,000 to $50,000.

If you are also retiling or moving fixtures, it usually makes sense to install the vanity as part of that project rather than separately, because the plumber and drywall work are already on site. See our estimated bathroom remodeling costs for the line items in each type of bathroom.

DIY vanity install: when it works and when it does not

A DIY install is realistic when:

• The new vanity is the same width and drain position as the old one.
• It comes with a pre-attached top and sink.
• The shutoff valves turn off fully and do not leak.
• The floor and wall behind the old vanity are dry and solid.

Call a pro when:

• The valves are old, stuck or leaking.
• The drain height or position does not line up with the new cabinet.
• You are installing a wall-mounted vanity and there is no blocking.
• You are setting a heavy stone top, which needs careful support, leveling and sealing.
• There is any sign of water damage around the old cabinet.

For the full step-by-step on swapping a vanity, read our guide to changing a bathroom vanity.

How long it takes

A like-for-like swap is usually a one-day job. With a custom stone top, the cabinet goes in first, the top is templated, and the top is installed when it is fabricated. New rough-in plumbing and wall repair add time for the plumbing work, drywall and paint.

Planning a vanity installation in Orlando?

The labor cost depends mostly on what is behind the old vanity, so the fastest way to a real number is to have someone look at it. Prime Construction installs bathroom vanities and tops on their own or as part of a full bathroom remodel, with plumbing handled under our Certified Plumbing Contractor license (CFC1433952). Call (407) 404-3944 or request an estimate.